Installation and characteristics of power distribution cabinet

The installation requirements of the distribution board (box) are: the distribution board (box) should be made of non-combustible materials; the production site and office with a small risk of electric shock can be installed with an open distribution board; Closed cabinets should be installed in poor processing workshops, casting, forging, heat treatment, boiler rooms, carpentry rooms, etc.; closed or explosion-proof cabinets should be installed in dangerous workplaces with conductive dust or flammable and explosive gases. The electrical facilities; the electrical components, meters, switches and lines of the distribution board (box) should be arranged neatly, installed firmly, and easy to operate. The bottom surface of the board (box) installed on the floor should be 5~10 mm above the ground; the center height of the operating handle is generally 1.2~1.5m; there are no obstacles within 0.8~1.2m in front of the board (box); the protection line is connected reliably; (box) shall not have bare electrification exposed; electrical components that must be installed on the outer surface of the board (box) or on the distribution board must have reliable screen protection

The product also uses a large-screen LCD touch screen to monitor the power quality such as voltage, current, frequency, useful power, useless power, electric energy, and harmonics. Users can see the operating status of the power distribution system in the computer room at a glance, so as to find hidden dangers early and avoid risks early.

In addition, users can also choose functions such as ATS, EPO, lightning protection, isolation transformer, UPS maintenance switch, mains output shunt, etc., to ensure the stability of the power distribution system in the computer room.